This past weekend I did something I had never done before, which isn’t hard to do with camera stuff since I’m so new to this all. I calibrated my lenses!

What the heck does that even mean?!

It means tweaking the autofocus of your camera for the lens that you have on it. This hopefully means faster autofocus and sharper images. And you want to do this and check this, because each camera and lens are different. Each combination of lenses and cameras is different. This means that the manufacturers can’t get everything 100% correct all the time. It would be great if they could, but, there are just too many variables in the way for that. So, we put the lens on the camera, and do some micro adjustments to the autofocus to get things as correct as possible.

With my Sigma 150-600mm Sport, I’ve had an issue where if you pick up the lens and start shooting, it won’t engage in the autofocus (AF) right away. You have to manually focus a bit before the AF will take hold and finish the focusing job. This is a bit of a PITA for when you need to very quickly get the shot as you often do with wildlife. Because of this issue, I and been thinking about doing this for a while, to see if it will fix it. Spoiler: I don’t know if this fixed the issue, as I have not had a chance to play with it since. But I also don’t really think it will have fixed it. Just have sharper images for when it does kick in.

When I got my Sigma 150-600, it came with a thing, called LensAlign, to help you figure out your lens AF points. It is a gizmo that you put together, set it up and look at different points on the gizmo and see where you think you are focused and where you really are focused. It is a really cool design and super simple to put together. Probably one of the easiest things ever to put together, the directions were great, and the pieces are labeled so you can’t muck it up at all. As you can see in the image of it, it has a slanted ruler like thing, and a bunch of bulls eyes and the like. Yup, all the technical jargon here!

What you do is using the Lens Align, you align it to your lens using some sighting holes on it. Then you unfocus your lens, then you auto focus it, and take a picture. You then look at where it focused and can adjust things as needed from there. Easy! Right? Maybe? Not really…

I took the picture, I looked at the picture on the screen of the camera. I looked at the picture on my computer screen. And I couldn’t tell what was sharp or not where it was supposedly focused. I do have an eye issue (astigmatism) where I have slight blur, so that definitely does not help. I decided it was time to see if there was a better way, a computerized way that can do the looking for me to see if things were sharp or not.

I started looking at the software that is suppose to work with Lens Align, and it seemed kind of pricey, but I didn’t really know much about it. I did what everyone does, and YouTubed it and the only videos I found on it were by the people that make the software. No one else really seems to use it. That there is a red flag. The next thing I noticed was that you have to take a bunch of pictures, upload to your computer, let it analyze them, then go back take more pictures, and back to the computer, etc, until the software figured out what you needed to do for the camera to be at the correct settings. That sounds like a bit old PITA right there.

I decided to see if there was something else out there. And I was very happy I did.

I came across multiple people using something called FoCal. And right off the bat, I was hooked, because you hooked up the camera to the computer so you don’t have to do any back and forth with the files! It does most of the heavy work for you as well with most settings and such. It was also about the same price as the other software, so, I grabbed the old MC and bought a copy.

So yes, no sponsored content here, I bought it all with my own money.

The first thing you need to do is print out the image that you will be pointing the camera at. Then put it on a wall someplace where you can make sure it gets plenty of light (something I struggled with in my dark house!) You will also want to make sure you have plenty of space to do this with. If you are testing a 600mm lens, like I was, you will need 12 meters of space. That is 40 feet. That’s a long way. And I could only get to about 11.3m (37 feet.) And the cool thing about FoCal is, it knew. It knew I was at 11.3m, and it warned me, that it was shorter than it should be. But, I had no more space at all, so that extra .6m was not going to happen at all.

When you first setup, the software will run some tests whilst connected to your camera. It will check a variety of things like the distance, and amount of light. There are a couple of things that it cannot do by itself, like set the camera to aperture priority. So, you will need to know your camera and how to get to those settings. As well as how to set the micro adjustments for auto focus. So, read your manual or other books you have about your camera!

Once you and the software are happy with how things are set it, you tell it to do its job. It will change some settings, take images, analyze, make graphs, then it will stop, flash on the screen, and if you have your audio turned up, it will literally tell you to change your autofocus micro settings. Then you tell it you did that and it goes back to doing its job.

You go back and forth several times, until it says it has figured out your best settings for the camera and lens and you just set it and forget it. That is if you have a camera that can remember which lens is attached and can store that info. The Canon 5D Mark IV, which I have, can remember 40 different lenses, so I don’t have to worry!

I went through this process for the Sigma 150-600mm Sport lens I have, as well as a nifty fifty 50mm F1.4 lens that my Beautiful Bride had gotten for her camera. And I recently purchased the Canon 16-35mm F2.8L III, and did the testing with it as well. Which was kind of sad as that was the first time the lens was actually on the camera, so the first images, weren’t even real images.

This whole process actually took me the better part of a day (8am – 3pm) as I tried to figure it all out. So it is time consuming, but I’m expecting the results to be well worth it when I get time to get out side and play with the lenses again!

Hey Gang!

Today we are going over the second part of my trip to Sheldon Lake State Park back on 2019-01-05. We will check out some more pictures I took that didn’t make it to the video, and I will babble some more about the day.

This cardinal was absolutely handsome in his breeding plumage. Extremely bright red and looking fine for the ladies! They can be quite fierce though and will defend their territories. There has been many a times when a pair of cardinals came after me because I was too close to where they were hanging out. So, be careful if you are walking amongst them, and they are feeling feisty. They will come after you too!

Sheldon Lake is a lot of fun. With all of the ponds there from when it was a fish hatchery you get so many chances to see different wild life, at each pond. It is like each pond has its own ecosystem. Different animals and plants are in each one, so each pond is like changing a channel on the TV. Some are just birds, some have snakes, some gators and river otters oh my!

The other side of the park has the coastal prairie, where a whole other ecosystem lives. The area is awesome as a whole.

This cute little guy, the Ruby-crowned Kinglet, are fun to watch, but hard to capture! They bounce around quickly looking for their snacks of bugs and insects. Quite often you will see several of them around, so it it can make it even harder to decide which one to focus on as they jump around.

The day was pretty cool, so finding the reptiles was not easy. There were no snakes or alligators to be seen anywhere. But the frogs and turtles did eventually come out.

This Red-eared Slider came out to check things out. Sadly someone took a chunk out of the side of its head so you cannot see its red ear. But, that is Pond Life. Everyday is a struggle for survival.

Shortly after seeing this guy it was time for me to head on back. So, I packed up my gear and started the drive out. And luckily as I was driving out, the Kingfisher that almost hit me on the way in to the park was chilling on a tree, and I was able to check it out and take a couple pics of it… Check out the video to see that guy!

Today we are talking about my latest video that went live yesterday. Part One of my VLOG where I was at Sheldon Lake State Park on 2019-01-05.

Yes, I’m blogging about my vlog. And I will tend to do that, blog about a vlog. This way I can bring you some more behind the scenes information as well some extra images that don’t make it to the video for whatever reason. Like this one….

This great blue heron was just walking around the bank of the first pond, and was in some absolutely gorgeous morning light. It was really hard to walk away from him to go find other images to take.

Let’s keep in mind that the day started off in the upper 30s fahrenheit (3-4C) so it was a chilly day to start with. But the temperatures did warm up as the day went on and we ended up with upper 60s (18-20C.) Let’s also keep in mind that there are alligators in the park. Especially these first two ponds I’m visiting. Because it was cold in the morning there was no real issue with the gators, since they were hunkered down in the water someplace. But as the temperatures warm up, they will rise to the top of the water and crawl out on to the banks to get some of those sun rays. So you always need to make sure you are aware of your surroundings when taking photos!

The above great egret was also at the same pond chilling out in the wonderful lighting and I was able to get a couple really nice reflection shots of it like the above one.

I’m still learning the whole DSLR camera game, and the Sigma 150-600 lens is my second lens. This is the second time I took it out to get some photos and I was really impressed with how nice the images are. The only issue I have with the lens, which could be a completely user error at this point, is you have to kick start the auto focus. If it is completely out of focus when you goto take the image, and you try to auto focus, it just won’t. You have to get it a bit in focus before the camera will take over and focus for you. A bit of a pain when you are in a rush, but I have yet to really sit down and play around with things to see how to make that better.

With the whole learning still, I still do something that some people are against, and some people are for, which is cropping. Most of the images you will see in my videos are cropped, up to this point anyways. The images above were also cropped. The next image is not cropped, then after it will be the image after I cropped it so you can see what I see and do with them.

A lot of the things I take images of are quite far away and even at 600mm don’t quite fill the frame as you can see with the cute little grebe there. So, I crop. Sometimes though, I do manage to get up close and personal with some images and don’t need to crop them, which of course is preferred.

And that is about all I have for today. Please check out the video below and enjoy. And of course, stay tuned for Part Two soon!

Cheers Gang!

Exhausted. One word to describe how I am the Monday morning after my weekend of NOLS (National Outdoor Leadership School) Wilderness First Aid course. And this blog post in no means replaces any kind of training at all. I barely scratch the surface and only talk about some of the things we did, learned about and went on. Be sure to get yourself some proper training before trying to perform first aid!

I have done First Aid classes in the past. I always re-up my Red Cross First Aid and CPR every two years. In Boy Scouts we did a couple of First Aid classes with the help of some paramedics. I have read some books on First Aid as well. None of those really even compare to what we did in the NOLS Wilderness First Aid (WFA) course. And this was just the basic version of their course! They have longer and more intense versions as well!

Unfortunately I didn’t take any pictures, especially of the awesome wounds that we were learning to take care off. So this blog will just be a whole lot of words. But for those who tl;dr: Take the course as soon as you can!

Now for the rest of you, here is what our weekend looked like:

Day 1

Morning

Patient Assessment System

Afternoon

Emergency and Evacuation Plans
Spine Injury
Head Injury
Shock
Wilderness Wound Management

DAY 2

Morning

Wilderness Wound Management
Musculoskeletal Injury
Heat Illness

Afternoon

Cold Injury
Lightning
Altitude Illness
Chest Pain, Abdominal Pain
Shortness of Breath, Altered Mental Status
Anaphylaxis

As you see, there was a lot of information to cover in the course. And we would stop the learning part, and put into practice what we learned, which was basically going and finding someone laying around outside and trying to figure out what happened and how best to handle the situation. By assessing the area, the patient and their wound we would determine if we needed to take care of spinal injuries, move them, evac them, or just patch them up and continue on our merry way.

Now, what is the difference, between Wilderness Medicine and Urban Medicine. Basically it boils down to the amount of time you have before professional care can take over looking after the patient. In most Urban areas, you can expect to call a number, like 911 in North American, and expect someone to show up within 15-30 minutes to take over and start administering professional care on the way to a place (hospital) that can look after all the issues without a problem.

In the Wilderness, you don’t have a lot longer until someone else takes over. You have, no cell coverage, no roads, no easy way for anyone to get to you or you to get to them, so possibly 8+ hours before someone with professional training can take over. So, we must learn how to mitigate the issues and try to bring the patient to someplace where the professionals can get to them more easily, and faster.

With that, let’s talk about what happened this weekend….

Saturday morning we show up to the classroom (at Armand Bayou Nature Center, another favourite place of mine!) And we go through the usual get to know everyone schpeel. “Who are you, why are you taking the course and what was your best First Aid you’ve ever preformed?” Okay, not so usual I guess talking about the best First Aid you’ve ever done. And there were some doozies! I talked about how after my hernia surgery, I split back open and had to keep myself from bleeding all over the place waiting on the ambulance.

PATIENT ASSESSMENT SYSTEM – We learned how to size up a situation, and work towards figuring out what had happened and what needed to start to happen to treat and/or evacuate the patient. At first (and second, third, and even twentieth) glance, this seems like a very complex and long drawn out process. You have all these steps to go through to check the area for your and the patients safety, then work towards figuring out what happened, what the patient has wrong with them, and start working towards how to patch them up enough to either carry on, or to evacuate.

But after practicing, this process that seems like it could take 20 minutes, actually can be done in less than 5 minutes with practice. Parts of the process like checking the area to make sure it it safe for you to proceed, and sizing up what could have happened, takes seconds in practice.

It alls comes down to: Checking to make sure it’s safe for you, what happened to them, getting on protection (gloves), figuring out how many people there are to deal with, whether they are dead or not. Moving onto a full body scan to make sure there isn’t more damage than what the patient complains about, and gathering information that will be useful down the road when handing them off to professionals. Yeah, it seems like a lot all at once, but, in practice, very little time is spent on it as it’s all done instantly.

We then took a break for lunch. Being at Armand Bayou, it was a great place for breaks! They have a lot of wildlife and nature stuff going on there, as well as an old homesteading place. Where they have black smithing, carpentry, sugar cane pressing and boiling and a bunch of that pioneering kind of thing. And on Saturday they actually did have black smithing going on, with some kids getting after it. It was pretty cool to see that happening. It was too cold for the reptiles to be out and about, but I did get to see some fun birds like cardinals, chickadees, pileated wood peckers, tit mouse, and ruby crowned kinglets. Then lunch was over and back to the learnings!

EMERGENCY AND EVACUATION PLANS – For this part of the course, we talked more about how to avoid needing to evacuate and needing emergencies, as it is better to prevent than to have the need for emergencies. But we did talk about what you should do if the need arises. Things like knowing where you are going and letting others know when, where and how you will be around there and when to expect to be back.

Part of that is also knowing who to contact when you are out there, and have an emergency. Local rangers, SAR (Search and Rescue) and the like, have their numbers, radio frequencies and the like, so you can contact them. But, again, the best way to prepare, is to avoid having an emergency in the first place!

SPINE INJURY – Here we finally start to get into the various injuries that we need to treat and figure out how to take care of. A lot of the training was more geared towards preventing the issues from even happening, since it is much better to never have to deal with the issues to start with. We talked about what could cause a spine injury and how do we figure out if we need to treat the patient like they have one.

HEAD INJURY – Head injuries are a tricky one. They can be either hidden and you won’t know about them, until you put a hand on it, or you can see blood gushing out all over the place. The gushing blood head injuries are actually not that bad, just bloody, and easy to put a cloth to and stop the bleeding.

Those other head injuries where you don’t know they are there until you feel them are a different beast. They can be a death sentence to the patient if you don’t give it some treatment and get the heck over to emergency care as fast as you can.

SHOCK – When talking shock, we weren’t talking electrical shock. Although it could cause shock. Basic shock is when the body starts to shut down on itself because of a lack of oxygen to the vital organs. We talked about things that would cause it, and how to prevent (again prevention is so much better than having stuff happen!) and how to treat for it if it wasn’t prevented. Again, most of this stuff was mostly working towards keeping the patient around long enough to get them to proper emergency care, so they would have a much better chance at full recovery.

WILDERNESS WOUND MANAGEMENT – Was a lot of fun. One of the instructors must have been, or currently is a horror movie makeup artist. I really wished I had thought to take pictures of the wounds that she gave people, as they were looking as real as you can get without actually creating the real thing. It was sort of sad though, as they were talking about the different types of wounds, I realized there was only one that I’ve never had. And it’s the one I hope to never try. Abrasion, laceration, puncture, avulsion, and amputation. Can you guess which one I’ve not had yet? We talked about how to clean and dress the wounds so that we could either keep on going, or having to evacuate because the wound was just too serious.

And that was the end of day one. At which point I had to race off to check into my hotel, and go to where I was meeting some outrigger canoe friends, that I hadn’t seen in like a couple of years, for dinner. This could be some foreshadowing to future outrigger canoeing as well, so stay tuned!

A crappy sleep at the hotel was definitely not what I wanted. But that’s what I got, thanks to how super dry the room was, causing me to wake up every 45 minutes to gulp down some water as my mouth was drying out to almost cracking. But, got through it and it was time for Day 2’s events!

WILDERNESS WOUND MANAGEMENT – Today we started off with blisters and burns. Once again, the fake wounds that the instructors created were amazing! The burns looked like the flesh had been cooked away, just without the smell. And then of course we talked about how to treat the burns and get them cleaned up enough to determine if the patient would need to be evacuated or would be able to continue on with whatever we are doing in the first place. If they were real bad of course, evac would be necessary to make sure the burns were properly taken care of.

Blisters, are also a lot of fun. Anyone that has done any amount of running, hiking, or the like will have known a blister or two, and we learned how to prevent them (again best practice!) and how to deal with them as needed whilst out in the middle of no where. Remember, some blisters are best left untouched as they are just fine and don’t need to be popped!

MUSCULOSKELETAL INJURY – That’s a big ole word, musculoskeletal. But simply put, it’s anything from twisted ankles, sprains, dislocated joints to broken bones. Anything that is muscle or bone or tendon related. We did quite a bit of practicing of bandaging for protection of making it so that people could walk out of the wilderness on their own. Since you know, it’s a lot easier if a person could walk out, versus carrying them out!

HEAT ILLNESS – Heat is definitely nothing to play around with. Heat exhaustion and heat stroke are some serious things that can cause some serious issues. Once again, the best thing to do here, is to prevent them from happening. But we did learn what needs to happen when they do happen and how to get people on the move as quickly as possible if they are dealing with heat stroke. Which is, cool them down fast!

And then once again it was time for lunch! Sunday was much warmer and as such, there were turtles out on the ponds and even got to see a small (3 foot) alligator swimming. Of course by the time I got my camera ready, it had dunk under the water and disappeared. But it was a very pleasant lunch just chilling out watching the rest of the wildlife around the ponds.

And then we were right back at things after lunch!

COLD INJURY – Things like frost bite, and hypothermia can be very serious issues when you are out in the cold. I personally have had a little bit of frost bite on my fingers, and it is really not fun. I have known people that have had to be evacuated during Winter Scout camps because they ended up with hypothermia. It is definitely nothing to mess around with. So we talked about how we would go about treating these issues as needed. And of course as always, we talked about the best way to prevent getting into a situation where a cold injury could happen.

LIGHTNING – We talked mostly about the prevention of being struck by lightning. Where you go to wait it out, how to wait it out if you cannot flee from it to a safe structure, like a building or vehicle. Things like just getting as small, low to the ground and comfortable as you can be during the storm.

ALTITUDE ILLNESS – Another issue out there in the wilderness is when flat landers start going up the mountains. Altitude illness happens. Even with non-flat landers it can be a thing. The quickest thing you can do for altitude illness? Go back down to a lower altitude! Often the patient will feel 100% again as soon as they hit a certain point. Where you can hang out for a bit and then attempt going back up the hill slowly again.

CHEST AND ABDOMINAL PAINS – Are not to be messed around with. If you can’t figure out why those pains are there, you need to get to a doctor immediately! Even if you do know why those pains are there, you probably should start heading back to civilization and seek treatment!

SHORTNESS OF BREATH and ALTERED MENTAL STATE – Can be caused by a wide range of things. I’m very very familiar with shortness of breath having been diagnosed with Asthma when I was 2 years old. I can control my breathing and get myself back to normal without medication, but it’s not fun and takes a while. Medication, makes it so it doesn’t happen to start with for the most part (prevention again!) or like an emergency inhaler, can work within minutes of breathing issues.

Altered mental states can be caused by many things, like drugs, bad foods, temperatures, lack of oxygen, pressure, stress, etc. If you can’t figure out what is causing the mental issues, then, it’s best to high tail it back to seek medical attention quickly.

ANAPHYLAXIS – This was an interesting lesson. We talked a lot of about allergies and what causes them and the severity of it all. Things like insect bites or food allergies that cause someone to go into anaphylactic shock. We also talked about how to use Epinephrine Auto-Injectors, or Epipens.

And that was the class. Wow that was a lot of information in a very short time. But it was a lot of fun. Learning all the different things and actually getting to put those learnings to use in different scenarios. The final scenario that we did, we had to do as a solo rescuer:

You are sea kayaking for several hours to your favourite island for several nights of camping. As you approach, you see there is already a kayak there. Bummed that someone beat you to your favourite spot, you continue on anyways. You don’t see anyone around yet, as you pull your kayak up onto shore. You get your gear ready to go up and prepare your camp. Then you see a form on the sand. Just laying there motionless….